3.7.5 betatesting experiences

Just did a fresh install on my tablet (the one upgrade from 3.0.6) and both simply installed and run fine.
I installed mypaint first and thought I noticed a difference so I tried "api gimp". :hot:
Maybe you need an "apt-get update" :nod:

Looks like gimp now uses "libmypaint" and mypaint uses "libmypaint-data"

I will try to build 3.7.6 including mypaint back :slight_smile:

2 Likes

Don't forget the "libmypaint-data-extras" :innocent:

1 Like

I have to retract that!
I hadn't noticed that installing gimp removed mypaint because I had mypaint open.
On closing it, it was gone. :eyepopping:

beta testing of 375a - the hardware is an
Acer Aspire 5750 g
Intel core i5 @ 2,5Ghz
Nvidia GeForce 610m 1GB ; Optimus

Part 1: Report Of Installation:

Network via Ethernet DCHP accessible and used
Boot live & install mode from usb flash:
„Optimus found, installation of additional drivers wanted?“
No. Continue with nouveau.
Arrived on DE;
all fine and working, openGL working,
screen resolution in XrandR control panel shows 1366x768, which is correct for this machine.

All in all the defaults of the live mode looks quite optimized, except the Cairo setup.
Installer starts up automatically;
Option 1 Install chosen
Auto-update of Installer appeared
Register for bug reporting = yes
Dialog … early alpha… blah = ok
Window “Elive Installer” : optimized options and auto partitioning chosen (1st option)
“older installation of Elive found… upgrade?” = NO
‘Chose method of partitioning’ = Automatic
Error occurred here – fall back to leaving the installer, “ you have chosen no option” report send by installer….
It should lead to the former window instead of quitting the installer

Initializing again
“you will erase your whole disk… “ = OK
ext4 chosen
encryption = No
(Progress bar ok now :wink: )
“there is no swap… chose one” = /dev/sda2
(with same size of available RAM – which is wrong - it should be more! )
= yes ‘OK’
erasing /dev/sda2 for swap
Elive gets installed on your hard drive, patience !
The following setup windows left by default, except
Inkscape, Xbmc, Thunderbird, Games, Netsurf = deselected; all other on defaults, next:
Elive Installer running…
Creating user, password, ect. Automatic login from default changed to: not = OK
processing… (takes long, by the way, ya?)
Processors are getting much too hot meanwhile = external active cooler plate added….
(seems that the sensor in Conky is gone, showing now 0C , before was 100C...)
“Installation successful”
= Reboot….
And hanging here:
… can not boot, waiting for harddisk 1:30 sec; timout ; prompt…

The Elive Installer was obviously not able to erase the disk before new partitioning
Result :

Started again from live media, I found with gParted :

not assigned 1x 8MiB empty part,
/dev/sda1/ 1x 8MiB grub2 core.img - primary
sda2/ 6,46 GiB swap - primary
sda3/ 39,06GiB ext4 – Elive_OS – primary
sda4/ 420,22GiB ext4 – Elive_home – primary

I guess that something went wrong because of overheating, may be -
former installs did not have these issues, they always boot.

I deleted all partitions and started from scratch -
doing manually partitioning:

Partition-table; new = GPT
/dev/sda1/ ext4 boot 2,05GiB - primary
/dev/sda2/ swap 8,00GiB - primary
/dev/sda3/ ext4 root 455,41GiB - primary

Initializing Elive Installer from Elive Menu
chose not Automatic,
“‘none’ My disks are already partitioned”
then following the guided setup until
Dialog “you don’t have an UEFI partition, do you want to create it now?”
= No.

Arrived in DE, all as expected so far;

next:
Installation of Nvidia driver for Optimus... :
https://forum.elivelinux.org/t/nvidia-privative-drivers-installation/1250/6?u=rebel450

Hi!

Window / application: the one by default for tar.bz2 extraction, window asking where you want to extract (on a little test machine with 1366x768)...

Thanks!

If I want to test the 32-bit version on my slow HP laptop, did you say that we were able to upgrade from 64 to 32 bits?

oops, I forgot that some hardware was not working properly on the 32-bit, on that machine including the touchpad, I will keep the 64-bit version

yes, without problems :slight_smile:

mmh, are we talking about the same versions ? :thinking: the kernel is the same and the support should be the same :confusing:

nvidia:

I don't know yet if the updated / improved elive tool makes now nvidia working or not for the version like 390, so im going to upload the build 3.7.6 as-is for nvidia status

This application? it looks without any problems for me (using same resolution):

Mmmh... im pretty confused with your installation experiencies:

:thinking: :confusing: it is, what is missing to configure? it uses a good made default settings for the generic tastes :thinking:

:thinking: :confusing:

:thinking: :confusing:
you booted in legacy or uefi mode ?

this is a BIOS type partition, created by the installer meaning that you booted in legacy mode...

and this doesn't sounds correct / possible unless you later booted on UEFI mode, it should not ask for an EFI partition unless you booted on UEFI :thinking:

Moving --> 3.7.6 betatesting experiences :boogie:

is 3.0.6 the version I need to download ?

OK found it
https://eliveisos.elivecd.org/betatest/32bit/

maybe add 32 bits somewhere in their name ?

Hello!

It's this app', but the next window, as I write: the one asking where you want to extract... :wink:

Salutations!

what in the hell are you talking about here ?

LOL - am so lost....

Hi!

Yes! There's a little wrong thing in the reply system... It's 3.7.5 betatesting experiences
But if you look at: Reply%20Elive%20forum , you got it! :wink:

:slight_smile:

aha..... = :roll_eyes::flushed::pleading_face::disappointed::sweat:

yes. (still no idea lol)

this is the elive 3.0 stable version (in 32bit), but if you want an updated 32bit version you should use the 32bit build of the alpha versions (actually only 3.7.4), which you can found in a subdir of the same link

yep, thats planned (requires a ton of work, for website plugins specially)

1 Like

Please, dont waste time with so, as you downloaded the iso you rename them immediately with 32 or 64 before the name and it's all..... :whew::happy:

2 Likes

yeah, but on such way it will be better integrated with the website plugins that manages the downloads and all... but yeah, its a ton of work :confused: